Description
The POWER9 scale-out family is the first set of servers that comes
completely cloud enabled out of the box with integrated PowerVM Enterprise
capabilities. These servers have a native hypervisor included at no
additional license cost. Additionally, on-chip analytics and algorithms
combined with a sophisticated PCIe Gen4 I/O architecture help clients run
their workloads at an optimized processor frequency for performance and
throughput. In combination with the DDR4 memory footprint of 1 TB, IBM
provides a system that is unmatched by the competition in terms of memory
scaling as well as the core to memory ratio needed for data-centric and
in-memory workloads. Live Partition Mobility capabilities help you migrate
from previous Power Systems. Every new S914 also has the option of a
temporary PowerVM license for your old server to support a seamless move of
workloads to POWER9. The Power System S914 server has built-in security
that can help you to be ready for current and future security threats.
Summary of standard features for Power S914 server:
-
POWER9 processor modules:
-
4-core, typical 2.3 to 3.8 GHz (max) POWER9 processor (#EP50)
-
6-core, typical 2.3 to 3.8 GHz (max) POWER9 processor (#EP51)
-
8-core, typical 2.8 to 3.8 GHz (max) POWER9 processor (#EP52)
(rackmount configuration only)
-
High-performance Mbps DDR4 ECC memory
-
16 GB (#EM62), 32 GB (#EM63), or 64 GB (#EM64) memory features
-
Up to 1024 GB of DDR4 memory with one Power Systems processor
-
Storage features:
-
Storage backplane with six SFF-3 bays and two front PCIe Gen4
capable NVMe U.2
-
Storage backplane with two or four front PCIe Gen4 capable NVMe
U.2 drive slots
-
Twelve SFF-3 bays/RDX bays
-
Option to split the above SFF-3 bays and add a second
integrated SAS controller without cache
-
Eighteen SFF-3 bays/dual IOA with write cache and external SAS
port
-
Twelve SFF-3 bays/RDX bay/dual IOA with write cache and
external SAS port
-
Option to attach an EXP12SX/EXP24SX SAS HDD/SSD expansion
drawer to the dual IOA
-
PCIe slots with single processor:
-
One x16 Gen4 full-height, half-length (CAPI)
-
One x8 Gen4 full-height, half-length (with x16 connector)
(CAPI)
-
Two x16 Gen4 full-height, half-length
-
Four x8 Gen4 full-height, half-length (One of these slots is
used for the required base LAN adapter.)
-
Integrated:
-
Service processor
-
EnergyScale technology
-
Hot-swap and redundant cooling
-
One front USB 3.0 ports
-
Two rear USB 3.0 ports
-
Two HMC 1 GbE RJ45 ports
-
One system port with RJ45 connector
-
Four hot-plug, redundant power supplies
-
Nineteen-inch rack-mounting hardware (4U)